How much fragrance oil to add to soy wax melts
Supplies For Candles show how to make wax melts
When you subscribe we will use the information you provide to send you these newsletters.Sometimes they’ll include recommendations for other related newsletters or services we offer.Our Privacy Notice explains more about how we use your data, and your rights.You can unsubscribe at any time.
Soy wax is eco-friendly because it comes from soybeans and is biodegradable, unlike paraffin wax. Wax melts are a bit like candles because they release scent when melted, but they don’t require a flame. You can melt wax melts on an electric burner, or above a candle if you like. Making your own wax melts means you can choose a smell you like and decide how intense you want that fragrance to be. Express.co.uk explains how much fragrance oil to add to soy wax melts, according to candle and wax melt supply company Supplies for Candles.
Wax melt making is easy when you know how, but it involves trial and error.
Your first time making wax melts may be a little stressful because you might not get the measurements right.
Adding too much fragrance risks making your wax melts too intense and giving everyone at home a headache.
Adding too little is a waste of fragrance oil because you will barely be able to smell it when the wax burns.
Don’t worry, Express.co.uk has chatted to the experts at Supplies for Candles to find out how to make the perfect wax melts.
Please note – variations in waxes, fragrances and dyes can all affect the finished product, so what works for some wax melts may not work for others.
READ MORE- Stacey Solomon shares how to make Christmas wax melts
How to make wax melts
Prepare a clean, flat and empty surface to work from and lay out all the equipment.
Make sure you have your clamshells or moulds at the ready as the process can go a lot faster than you might initially expect – it’s important to work quickly.
Weigh how much wax you need (for this example, we are using 100g) and then empty the measured wax into a glass bowl.
Place the glass bowl into a pan filled halfway with water and then heat your wax to 70°C whilst stirring gently. Do not exceed 80°C.
Paraffin wax only takes 10 to 15 minutes to melt, but soy wax may take even less than this because it has a lower melting point.
Once the wax has melted, add the candle dye if you want your wax melts to be coloured.
Add a few drops at a time to the wax and stir, adding until you get your desired colour.
Once the dye is fully dissolved, take the wax off the heat and wait until it reaches 65 degrees celsius. Then it’s time to add the fragrance.
13 indoor activities to keep kids entertained during lockdown [INFORMER]
Macrame wall hanging: How to make your own macrame hanging [INSIGHT]
How to blow dry your own hair – the five steps to a salon-worthy do [EXPLAINER]
How much oil you add depends on how intense you want the fragrance to be.
However, Supplies for Candles recommends using up to 10 percent fragrance oil.
For example, if you were using 5kg of wax you would add 500ml of your fragrance of choice.
Anything more might be too strong and if you add much less it may be undetectable.
When all your ingredients are mixed, with your wax is at 60-65°C, it is time to pour the wax.
Pour your molten wax out of the container and into a pouring jug.
Slowly pour your wax into your wax melt mould. Your wax melts should now be starting to set.
Allow a good few hours for them to set and fully solidify.
Supplies for Candles recommend storing your wax melts in a cool, dark place for approximately two weeks to ‘cure’, but this isn’t essential.
You can use your wax melts a few hours after they’ve set if you can’t wait to use them.
Source: Read Full Article